{"product_id":"umi-performance-93-02-gm-f-body-tunnel-mounted-trq-arm-lt-headers-no-loop-red","title":"UMI Performance 93-02 GM F-Body Tunnel Mounted Trq. Arm- LT Headers- No Loop - Red - 2202-R","description":"\u003cdiv class=\"manufacturer-description\"\u003e\n  \u003cp\u003eTrack abuse, street abuse, or just flat-out abuse, this torque arm is designed to handle it all! Eliminate unwanted traction problems by adding a UMI Performance tunnel brace mounted torque arm. This aftermarket torque arm replaces the flimsy factory torque arm while adding strength, rigidity and eliminating suspension flex. UMI’s torque arm design relocates the front torque arm mounting point off the transmission tail shaft protecting the transmission and preventing transmission damage. A shorter torque arm improves weight transfer on acceleration. General Motors tail shaft mounted design works great for a stock driven vehicle however it was not designed to take the abuse of a drag car. UMI’s tunnel mounted torque arm bolts to existing floor pan holes using 3\/16” thick mild steel laser cut mounting plates and metric grade 10.9 hardware. The torque arm attaches to the supplied cross brace using polyurethane bushings on both the supplied cross brace and torque arm to help absorb noise. The torque arm rear mount is 3\/8” thick CNC machined mounting plates and are appropriately drilled to fit the stock rear ends as well as aftermarket 12-Bolt’s, 9” Rear-end housings and Strange S60.\u003c\/p\u003e\n  \u003cp\u003eTorque Arm Benefits:\u003c\/p\u003e\n  \u003cp\u003eRemoves torque arm from transmission tail shaft protecting transmission from damage.\u003c\/p\u003e\n  \u003cp\u003ePivot brackets allow instant center adjustment.\u003c\/p\u003e\n  \u003cp\u003eEliminates wheel hop and solves traction problems.\u003c\/p\u003e\n  \u003cp\u003eReduces front end nose dive during braking.\u003c\/p\u003e\n  \u003cp\u003eAllows for easy on the car pinion angle adjustments.\u003c\/p\u003e\n  \u003cp\u003eGreaseable polyurethane bushings designed to keep road noise at a minimum.\u003c\/p\u003e\n  \u003cp\u003eBolt-on design requires no welding or drilling during installation.\u003c\/p\u003e\n  \u003cp\u003eBuild Features:\u003c\/p\u003e\n  \u003cp\u003eFabricated from 1.250” x 0.120” DOM seamless steel tubing.\u003c\/p\u003e\n  \u003cp\u003eCrossmember uses 0.120” x 2.000” rectangular tubing.\u003c\/p\u003e\n  \u003cp\u003eTIG welded 4140 CrMo tube adaptors, built in house.\u003c\/p\u003e\n  \u003cp\u003ePinion changes made using 4140 CrMo heat treated adjuster, built in house.\u003c\/p\u003e\n  \u003cp\u003eCNC laser cut mounting plates to ensure hole to hole accuracy\u003c\/p\u003e\n  \u003cp\u003eRear Mounting Plates machined from 3\/8” thick mild steel for strength and designed to fit stock rear end as well as 12- Bolt, S60 and 9” housings.\u003c\/p\u003e\n  \u003cp\u003eTorque arm attaches to mount using solid ¾” rod eyes and grade 8 hardware\u003c\/p\u003e\n  \u003cp\u003eDurable gloss powder coat finish.\u003c\/p\u003e\n  \u003cp\u003eExhaust clearance: P\/N 2202 is designed with a drop down front cross member to clear virtually all aftermarket header\/y-pipe set-ups on the market. It will also clear most merge collectors such as QTP and TSP y-pipes. P\/N 2202 does reduce ground clearance, if vehicle has a tighter fitting y-pipe set up please see P\/N 2200.\u003c\/p\u003e\n  \u003cp\u003eRear torque arm hardware kit- We highly recommend purchasing a new hardware kit if running this torque arm on a factory rear-end, Strange or other similar rear-ends that use a straight through long bolt design. Factory torque arm bolts will work however are slightly too short and may not work correctly. For Moser Engineering 12-Bolt rear-end use P\/N 2998, the Moser 12-Bolt uses four ½” bolts, P\/N 2998 includes longer ½” bolts and spacers to reduce movement. P\/N 2998 is for Moser 12-Bolt only, use P\/N 3003 on Moser 9”.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UMI Performance","offers":[{"title":"Default Title","offer_id":53406124015979,"sku":"UMI2202-R","price":594.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/9690\/4998\/files\/UMI2202-R.jpg?v=1788357908","url":"https:\/\/www.raptorracing.com\/products\/umi-performance-93-02-gm-f-body-tunnel-mounted-trq-arm-lt-headers-no-loop-red","provider":"Raptor Racing","version":"1.0","type":"link"}